Bulgaria – Refuse-collection vehicles – “Supply through purchase of brand-new, newly manufactured specialized refuse-collection equipment for the needs of the town of Lukovit” in three separate lots, as follows: Separate lot No. 2: New specialized refuse-collection vehicle for food and biowaste with a superstructure volume of at least 5 m3 – 2 units.

Opportunity description

2. Separate lot No. 2: Specialized refuse-collection vehicle for food and biowaste with a superstructure volume of 5 m3 Base vehicle and superstructure - Brand-new, manufactured no earlier than 01.01.2025. A. BASE VEHICLE Manufacturer........./make ..... / model ....... to be specified in the Technical Proposal by the tenderer) 1. Technically permissible mass - > 5,000 kg. 2. Wheel configuration - 4x2, rear-wheel drive; Wheelbase ≤ 3,000 mm. 3. Engine - Displacement ≥ 2800 cm3; Power ≥ 125 kW; Maximum torque ≥ 400 Nm; The vehicle must comply with ORDINANCE No. N-21 of 19.12.2023 on the requirements for clean vehicles 4. Emission standard-Minimum Euro 6E or equivalent 5. Gearbox - Manual or automatic gearbox with at least 6 forward gears and one reverse gear 6. Braking system - Pneumatic with ABS, ASR, ESP or equivalent systems; Disc brakes on the front and rear axles; Parking brake; 7. Suspension - First axle – steerable with independent mechanical suspension, axle load ≥ 2000 kg; Second axle – driven with leaf-spring suspension, axle load ≥ 3500 kg; 8. Cab - Day (short) cab, 1+2 seats; Cab color: white; Driver’s seat with 3 adjustments - tilt/longitudinal position/height; Electric window controls; Electrically adjustable heated rear-view mirrors; Latest-generation digital tachograph; Air conditioning; Front fog lights; Front daytime running lights, automatically activated when the engine starts; Cruise control; Radio with hands-free function and USB connection; Reversing buzzer 9. Steering - Left-hand, adjustable steering wheel 10. Equipment - 12 V electrical system; Spare tire with rim; Wheel chocks against unintended movement; Basic tool kit, jack B. SUPERSTRUCTURE Manufacturer........./make ..... / model ....... to be specified in the Technical Proposal by the tenderer) Type - Refuse-collection superstructure with a “tipper” type mechanism Main requirements for the superstructure - Waste hopper volume ≥ 5 cubic meters; Combined device for lifting and emptying containers, for metal and plastic receptacles with volumes of 120, 240 and 360 liters; Emptying of bins/containers by means of two successive movements – lifting and rotating the bins/containers to prevent waste from falling/leachate from spilling onto the ground during the operation; Emptying of the waste hopper by lifting and tilting the superstructure; 2 rear hydraulic stabilizers to stabilize the vehicle during the hopper-emptying process; Rigid, fixed roof over the front loading section of the superstructure and a hydraulically controlled sliding roof (opening/closing) over the rear loading section of the superstructure; Hydraulic drive via a power take-off (PTO) gearbox from the vehicle’s gearbox; At least 1 work lamp to illuminate the superstructure during nighttime operation; Rotating warning lights: front and rear; Superstructure control panel located at the rear of the vehicle; C. WARRANTY PERIOD Chassis warranty period: Minimum 24 /twenty-four/ months or mileage of 100,000 /one hundred thousand/ km. – whichever of the two events occurs first. Superstructure warranty period – minimum 24 months 2. Separate lot No. 2: Specialized refuse-collection vehicle for food and biowaste with a superstructure volume of 5 m3 Base vehicle and superstructure - Brand-new, manufactured no earlier than 01.01.2025. A. BASE VEHICLE Manufacturer........./make ..... / model ....... to be specified in the Technical Proposal by the tenderer) 1. Technically permissible mass - > 5,000 kg. 2. Wheel configuration - 4x2, rear-wheel drive; Wheelbase ≤ 3,000 mm. 3. Engine - Displacement ≥ 2800 cm3; Power ≥ 125 kW; Maximum torque ≥ 400 Nm; The vehicle must comply with ORDINANCE No. N-21 of 19.12.2023 on the requirements for clean vehicles 4. Emission standard-Minimum Euro 6E or equivalent 5. Gearbox - Manual or automatic gearbox with at least 6 forward gears and one reverse gear 6. Braking system - Pneumatic with ABS, ASR, ESP or equivalent systems; Disc brakes on the front and rear axles; Parking brake; 7. Suspension - First axle – steerable with independent mechanical suspension, axle load ≥ 2000 kg; Second axle – driven with leaf-spring suspension, axle load ≥ 3500 kg; 8. Cab - Day (short) cab, 1+2 seats; Cab color: white; Driver’s seat with 3 adjustments - tilt/longitudinal position/height; Electric window controls; Electrically adjustable heated rear-view mirrors; Latest-generation digital tachograph; Air conditioning; Front fog lights; Front daytime running lights, automatically activated when the engine starts; Cruise control; Radio with hands-free function and USB connection; Reversing buzzer 9. Steering - Left-hand, adjustable steering wheel 10. Equipment - 12 V electrical system; Spare tire with rim; Wheel chocks against unintended movement; Basic tool kit, jack B. SUPERSTRUCTURE Manufacturer........./make ..... / model ....... to be specified in the Technical Proposal by the tenderer) Type - Refuse-collection superstructure with a “tipper” type mechanism Main requirements for the superstructure - Waste hopper volume ≥ 5 cubic meters; Combined device for lifting and emptying containers, for metal and plastic receptacles with volumes of 120, 240 and 360 liters; Emptying of bins/containers by means of two successive movements – lifting and rotating the bins/containers to prevent waste from falling/leachate from spilling onto the ground during the operation; Emptying of the waste hopper by lifting and tilting the superstructure; 2 rear hydraulic stabilizers to stabilize the vehicle during the hopper-emptying process; Rigid, fixed roof over the front loading section of the superstructure and a hydraulically controlled sliding roof (opening/closing) over the rear loading section of the superstructure; Hydraulic drive via a power take-off (PTO) gearbox from the vehicle’s gearbox; At least 1 work lamp to illuminate the superstructure during nighttime operation; Rotating warning lights: front and rear; Superstructure control panel located at the rear of the vehicle; Superstructure warranty period – minimum 24 months C. WARRANTY PERIOD Chassis warranty period: Minimum 24 /twenty-four/ months or mileage of 100,000 /one hundred thousand/ km. – whichever of the two events occurs first. The subject matter of the contract also includes training for at least one operator and the provision of warranty (service) maintenance for the delivered equipment during the warranty period. The vehicle engines must comply with the requirements of ORDINANCE No. N-21 of 19.12.2023 on the requirements for clean vehicles. The full scope of the activities and the minimum requirements for the technical characteristics of the trucks and superstructures are described in detail in the Technical Specification appended to the tender documentation. 2.1. Maintenance and repair Maintenance and repair of the equipment shall be carried out at the contractor’s service facility (owned or rented), within the country, within the warranty periods and warranty (service) maintenance. 2.2. Other requirements 2.2.1. The equipment must be accompanied by operating instructions or an operating manual in Bulgarian. 2.2.2. The equipment must be accompanied by documents certifying its quality and origin and the documents necessary for its registration. 2.3. Warranty liability and warranty requirements. 2.3.1. The contractor shall guarantee the full functional fitness of the delivered equipment, in accordance with its intended purpose and the technical assignment. 2.3.2. Within the warranty period, the contractor shall, using its own labor and resources, remedy all defects, deficiencies and/or damage and/or non-conformities that arise in the delivered used refuse-collection vehicles, and shall replace defective parts and/or components with new ones, as applicable. The warranty covers all systems, units, assemblies and parts of the equipment, in accordance with the manufacturer’s requirements in the service booklet concerning the manufacturer’s warranty liability, and includes: 2.3.3. Full warranty service provided for a period of at least 24/twenty-four/ months or mileage of 100,000 /one hundred thousand/ km.- whichever of the two events occurs first, calculated from the date of registration of the refuse-collection vehicles with the Traffic Police. 2.3.4. Technical servicing in accordance with the service schedules of the chassis and superstructure manufacturers is not the subject of this public procurement. Where certificates, standards, makes, models or other similar items are specified in the technical specification and documentation, “and/or equivalent” shall be read throughout. In accordance with Art. 48, para. 1 of the Public Procurement Act, the necessary characteristics of the subject matter of the public procurement are individually specified in detail in the Technical Specification[1] of the Contracting Authority’s requirements (“Technical Specifications”). [1] According to the definition in §2, item 54, letter “b” of the Supplementary Provisions of the Public Procurement Act. Procedure: open. Estimated value: 1,619,000 BGN. Review the original TED notice for the complete requirement, lots, amendments and attachments.