Bulgaria – Waste and rubbish containers and bins – Supply of bio-waste containers in two separate lots, as follows:

Opportunity description

Supply of bio-waste containers in two separate lots, as follows: Lot No 1: Supply of mobile bio-waste containers with a capacity of 1.1 m³, “Beaver” type - brown – 476 pcs. Lot No 2: Supply of mult lift containers for wood waste, 5.5 m3 - green – 40 pcs. The supplied “Beaver” type containers for the separate collection of bio-waste must be branded with the logo of Lukovit Municipality, sequentially numbered and with a pre-installed socket for placing a tag. The participant selected as contractor must deliver the containers after receiving a request from the Contracting Authority. The participant selected as contractor must ensure delivery and provide warranty service for the supplied equipment, which will be used for the needs of Lukovit Municipality. The Contracting Authority reserves the right to commission delivery of the containers that are the subject of this public procurement within 1 (one) calendar year from the signing of the contract – in full or in parts, according to the need it has identified for their placement in the individual settlements within the territory of Lukovit Municipality. The specified quantities of waste containers are estimated, and the Contracting Authority may request delivery of a quantity smaller than the estimated quantity, in which case it shall not be liable to the contractor for requesting delivery in a volume smaller than the estimated volume. Volume (l) – 1100 Load capacity (kg) - 440 Suitable for the collection of food and bio-waste. Lid: flat, fitting tightly against the body, equipped with min. 4 pcs. handles for manual opening, located at the front and sides, for easier servicing. The containers must be branded with the coat of arms of Lukovit Municipality: hot-stamped coat of arms of Lukovit Municipality on the front /facing/ side, with dimensions of the coat of arms: Height – minimum 22 cm; Width – minimum 16 cm. The containers must be sequentially numbered: hot-stamped numbering on the front /facing/ side above the coat of arms of Lukovit Municipality, starting from No 001 to No 100. With a pre-installed socket for placing a tag. Material: /HDPE/ high-density polyethylene; Wheels: 4, of which at least 2 with a locking brake system, wheel diameter min. 200 mm. Compliance with EN 840-2:2020, EN 840-5:2020, EN 840-6:2020. They must be certified in accordance with RAL-GZ 951/1/06.13 and AfPS GS 2019:01 PAK. Allowing servicing to be carried out with all types of waste collection vehicles complying with standard EN 1501-1; Resistant to UV radiation and chemical and biological effects. Smooth surface preventing dirt from adhering. Made of recyclable material containing no cadmium. brown colour Procedure: open. Estimated value: 319,920 BGN. Review the original TED notice for the complete requirement, lots, amendments and attachments.