Germany – Assembly and erection of prefabricated structures – Construction of a container facility for Grundschule Ebstorf for rent
In the course of the renovation of Grundschule Ebstorf, temporary classrooms are required. These are to be created by means of a container facility to be erected by the contractor. The container facility consists of a ground floor and an uppe
Opportunity description
In the course of the renovation of Grundschule Ebstorf, temporary classrooms are required. These are to be created by means of a container facility to be erected by the contractor. The container facility consists of a ground floor and an upper floor. Overall dimensions of the combination: length x width x height approximately 25.00m x 15.50m x 6.00m plus approximately 12.50 m x 6.00 m (final expansion stage), clear room height approximately 2.50m, classroom size at least approximately 55-60 sqm (2 times) and approximately 70 sqm (4 times); extension: 2 x approximately 70 sqm (after approximately 18 months) Key equipment features: external sun protection in the form of external venetian blinds, double- or triple-pane insulating glazing made of thermal insulation glass, Ug value 1.1 W/m²K or better, canopy over main entrance, entrance landings with stairs, entrance ramp, external staircase as 2nd escape route from upper floor (steel staircase); heating installation: classrooms and technical room: electric wall convectors approximately 2.0 kW, wall-mounted, sanitary rooms: electric rapid heaters approximately 1.0 kW, wall-mounted; air conditioning with split air-conditioning units; lighting: The classrooms must be equipped with at least 500 LUX; escape route lights: self-contained battery lights 8W/3h, including cable-routing duct Container exterior lighting: floodlights, <= 30 W, central control via twilight switch and timer. The room modules must contain within the room structure the cabling required for the electrical installation, including the electric heating units. The electrical installation as a whole must comply with the relevant VDE and DIN regulations. A corresponding test report in accordance with VDE 0100 must be prepared. IT cabling: data-processing inserts 4 x RJ 45 Cat 7, including cabling using Cat 7 duplex cable, network cabinet; wirelessly interconnected smoke detectors; sanitary installation; wastewater connection; building connections for electricity, water and fiber optics; flooring as hard flooring, material thickness at least 2mm Procedure: open. Estimated value: 14,000,000 EUR. Review the original TED notice for the complete requirement, lots, amendments and attachments.
Business details are available after sign in
Codes, capabilities, evidence, buyer details and marketplace actions are withheld from the public HTML and API response.