Germany – Construction work for university buildings – TUD BAR Barkhausen Building Wing A

Opportunity description

Renovation of a listed office, teaching and research building with a total of five floors (2nd basement level - 2nd upper floor). - cold roof (gable roof) used for technical requirements - partial area, consisting of an angled existing building approx. 16x40 m with an adjoining single-storey new building approx. 11x23 m, of a multi-wing building complex - building height at ridge approx. 11 m above ground level, foundation of new-build section approx. 9 m below ground level - gable roof, partly photovoltaic - 2 stairwells for pedestrian access; construction-site lift and unloading platforms for material transport - construction project on a confined construction site - construction period from December 2026 to August 2029 - ERDF funding for measures to improve energy efficiency - usable area 1-6 = 1,600 m² - gross floor area = 4,200 m² Required access road on north side, construction-site setup area (north courtyard) Roof (carpentry/structural work/demolition) Scaffolding Construction-site setup, construction water Construction power, construction lighting Roofing/sheet-metal roofing Lightning protection Demolition and hazardous-material remediation Disconnection of electrical systems Technical dismantling Structural renovation Cement screed/machine foundations New-build structural work / structural steelwork Steelwork Creation of construction-site setup area (RaR) Plastering work: exterior plaster + interior plaster Windows I Doors Solar and glare protection Technical insulation HVAC and plumbing Sanitary/fire-extinguishing technology Heating/cooling Ventilation technology Cooling generation Electrical installation Renovation of historic lights Data network BOS radio Hazard alarm system Electronic locking system Building automation Mastic asphalt incl. impact sound insulation / screed / thermal insulation Interior fit-out of anechoic room (acoustic fit-out) Drywall + acoustics, steelwork in conjunction with drywall Tile and slab work Floor coating Painting work Floor-covering work Joinery built-in furniture I Joinery fitted kitchens Compressed air Laboratory equipment Building automation cooling network Media technology Active data-technology components Procedure: open. Review the original TED notice for the complete requirement, lots, amendments and attachments.