Germany – Electrical fitting work – New construction of a Fire Protection and Training Center (BAZ) at the Newel site

Opportunity description

I. General description: The Trier-Land collective municipality is planning the construction of a central fire protection and training center in Newel in order to consolidate the supraregional functions of the collective municipality fire brigade, exploit synergies, and increase operational readiness. In the future, the building is intended to provide space not only for the secure accommodation of vehicles, but also for the storage and organization of a wide range of equipment. In addition to the facilities mentioned, training and meeting rooms will be provided, not only for regular training and information on new technologies, regulations, and deployment strategies, but also for the centralized initial and continuing training of the fire brigade personnel throughout the Trier-Land collective municipality. The training area will be completed by a training yard and a training wall, which are specially designed for practical instruction and training. The fire brigade’s workshop areas will be supplemented by additional office and workshop areas for the collective municipality (municipal works yard, forestry special-purpose association) in order to cover a broader range of inspection, maintenance, and repair work. The ground floor and upper floor of the two-story building structure are planned as a solid reinforced-concrete construction with a high degree of prefabrication. The exterior walls consist of reinforced-concrete cavity walls, will be thermally insulated, and will receive an aluminum curtain wall with freely designed profile geometry. The vehicle hall is to be constructed as a conventional reinforced-concrete frame structure. The partition wall between the vehicle hall and the adjoining ancillary-room program is planned as a thermally insulated reinforced-concrete wall. Inside, the reinforced-concrete cavity walls are to remain predominantly exposed. The roof structure, in the form of a green roof with a PV system, rests on reinforced-concrete girders and consists of a load-bearing trapezoidal-sheet shell as a warm-roof assembly, with acoustic perforations on the underside. The electrical installation is required under the present procurement. The bill of quantities included in the procurement documents comprises 17 titles. - Approx. 6,200m MYM-J 3x1.5 mm² - Approx. 13,700m MYM-J 3x2.5 mm² - Main distribution board with 2 current-transformer metering systems (consumption + direct PV feed-in) - 2 network cabinets 46HE 800x1,200mm - Approx. 13,500 m Cat. 7 cable - simplex - Approx. 46 recessed ceiling downlights, around 240mm - Approx. 30 recessed ceiling grid luminaires - Construction-site power supply with 3 construction-site power distribution boards for the entire construction period - Sun-protection system with 38 sun-protection motors - Emergency call system for accessible WC - 1 unit charging station with 2x22 kW The bill of quantities included in the procurement documents comprises 17 titles over 177 pages. - Approx. 6,200m MYM-J 3x1.5 mm² - Approx. 13,700m MYM-J 3x2.5 mm² - Main distribution board with 2 current-transformer metering systems (consumption + direct PV feed-in) - 2 network cabinets 46HE 800x1,200mm - Approx. 13,500 m Cat. 7 cable - simplex - Approx. 46 recessed ceiling downlights, around 240mm - Approx. 30 recessed ceiling grid luminaires - Construction-site power supply with 3 construction-site power distribution boards for the entire construction period - Sun-protection system with 38 sun-protection motors - Emergency call system for accessible WC - 1 unit charging station with 2x22 kW Procedure: open. Review the original TED notice for the complete requirement, lots, amendments and attachments.