Germany – Firefighting vehicles – Supply of a type HLF20 firefighting group vehicle in accordance with DIN EN 1846 and based on DIN 14530 Part 27, with a standard-size 1600 Ltr. extinguishing water tank, a mounted 5.0 t Rotzler cable winch, and single-person reels at the rear of the body

Opportunity description

see specifications LV 1.0 Chassis: Suitable and technically equipped to accommodate a type HLF 20 firefighting group vehicle body in accordance with DIN EN 1846 and based on DIN 14530 Part 27; extinguishing water tank – standard version with a capacity of approx. 1600 ltr, with single-person hose reels at the rear of the vehicle and with a Rotzler Treibmatic cable winch, equipment body extended by approx. 300mm If necessary, the fire chief of the volunteer fire brigade will apply to the district fire chief for an exemption permit for the overall height and overall length. Total weight increased to approx. 16,800kg Short driver's cab with hydraulic tilting system for a crew of 1/1; diesel forward-control chassis with 4x4 all-wheel drive and all operating and warning equipment in accordance with DIN, cavities preserved and treated with underbody protection. The required technical chassis equipment will be coordinated between the chassis supplier and the body supplier. A copy of the bid drawing and the coordination record, signed by both, will be sent to the Municipality of Wentorf bei Hamburg (hereinafter = contracting authority), so that no claims not listed in the solicitation arise against the contracting authority after the solicitation for technically required chassis modifications. LV 2.1.1 Body: Fire service body, type HLF 20 firefighting group vehicle body in accordance with DIN EN 1846 and based on DIN 14530 Part 27, with standard extinguishing water tank with a capacity of approx. 1600 lfr., with single-person hose reels at the rear of the vehicle and with a Rotzler Treibmatic cable winch Equipment body extended by approx. 300mm, if technically possible, on a suitable chassis with 4x4 all-wheel drive coordinated wheelbase length between 3,700mm and 4,200mmj Euro VI, E emissions standard (or comparable technology) Twin tires on the 2nd axle Vehicle length: please record in the bid sketch in compliance with the above-mentioned DIN and the relevant STVZO Vehicle width: approx. 2.55 m Permissible total weight 16,800 kg with all operating and warning equipment in accordance with DIN, cavities preserved and treated with underbody protection. Chassis with a permissible total weight of 16,000 kg / 16,800kg Short driver's cab with hydraulic tilting system for a squad crew of 1/1; coordinate the design of the rear wall of the driver's cab with the chassis supplier in the event of an order The required technical chassis equipment will be coordinated between the chassis supplier and the body supplier. A copy of the bid drawing and the coordination record, signed by both, will be sent to the Municipality of Wentorf (hereinafter = contracting authority), so that no claims not listed in the solicitation arise against the contracting authority after the solicitation for technically required chassis modifications or body modifications If necessary, the fire chief of the volunteer fire brigade will apply to the district fire chief for an exemption permit for the overall height and overall length Procedure: open. Review the original TED notice for the complete requirement, lots, amendments and attachments.