Germany – Installation work of refrigeration equipment – Heidelberg, University Hospital, Renovation and Subsequent Use of Forensic Medicine / HeiCINN Ventilation and Air-Conditioning Systems DIN 18379

Opportunity description

Ventilation and air-conditioning systems DIN 18379 Renovation of reinforced concrete building, high-rise building, with surrounding escape balconies, square floor plan, with attached low-rise buildings, consisting of 2 basement levels, underground car park and basement, as well as ground floor, 1st floor to 6th floor, attic with central plant room - ventilation and air-conditioning system with cooling and heating coils, sound attenuators, heat recovery, with run-around coil system incl. pumping station and all hydraulic components, filters, etc. 30,000 m³/h. Supply and exhaust air locally separated. - Supply/exhaust ventilation and air-conditioning system with cooling and heating coils, humidification, sound attenuators, heat recovery, filters, etc. 6,500 m³/h. - Supply/exhaust ventilation and air-conditioning system with cooling and heating coils, sound attenuators, heat recovery, filters, steel spring vibration isolators, etc. 6,000 m³/h. - Two supply/exhaust air-conditioning cabinet ventilation and air-conditioning systems with cooling and heating coils, filters, etc. 2,700 m³/h. - Special exhaust-air system with two parallel plastic fans, with sound-insulation enclosure, filters, louvre and control dampers, etc. 4,000 m³/h each. - Compact supply/exhaust ventilation and air-conditioning system with heating coil, ceiling mounting, sound attenuators, heat recovery, filters, etc. 550 m³/h. - Outdoor-air and exhaust-air towers, diameter approx. 1.5 m, total height approx. 3.7 m, for 33,000 m³/h - Combined outdoor-air intake and exhaust-air tower Ø1600 mm, total height approx. 5.5 m, for 10,000 m³/h - Outdoor-air and exhaust-air towers, diameter approx. 0.7 m, total height approx. 4 m, for 5,000 m³/h - 5,344 m² galvanized steel air ducts and fittings, edge length 0 to over 2,000 mm - approx. 1,500 m galvanized steel spiral-seam pipe DN 80 to DN 355 incl. fittings, other components and fastenings - approx. 650 m² PPS air ducts and fittings, rectangular, edge length 0 to over 2,000 m - approx. 750 m PP pipe, galvanized steel, OD 75 to DN 500 incl. fittings, components and fastenings - approx. 180 BSK rectangular or round, electronically controlled, various sizes - approx. 430 VSR constant, approx. 150 VSR variable, rectangular or round, various sizes - approx. 277 SD round, and approx. 25 splitter SD rectangular, various sizes - approx. 400 outlets, various types and sizes Procedure: open. Estimated value: 3,002,498.41 EUR. Review the original TED notice for the complete requirement, lots, amendments and attachments.