Germany – Piping – H.DL1 Section 23 and H.FL1 SBL-BEU

Opportunity description

Supply of DN 1200 steel pipes Manufacture and supply of welded steel pipes for the transport of drinking water in accordance with DIN EN 10217-1, taking into account DIN EN 10224 and DIN 2460, dimensions in accordance with DIN EN 10220. To be supplied are 1.480,50 m of DN 1.200 steel pipes; dimensions 1219 X 12,5 mm, ZM / PE-v + FZM or GFK, material P235TR2, material no. 1.0255, length of individual pipe sections 13,5 m All pipes with: - ZM lining for drinking-water pipelines in accordance with DIN EN 10298, CEM I in conjunction with DIN 2880 - hygienic requirements in accordance with DVGW W 347 in conjunction with W 270, UBA guidelines, German Drinking Water Ordinance and DIN 2000, - reinforced PE-v external coating in accordance with DIN 30670, color black, minimum layer thickness 3,7 mm and - for installation in a pipe trench: either with an additional FZM coating in the standard version (FZM-N) in accordance with the manufacturer’s instructions and DVGW worksheet GW 340 for mechanical protection, minimum layer thickness 7mm OR with GFK coating in accordance with the manufacturer’s instructions, minimum layer thickness 2,5 mm - 3.1 inspection certificates for steel pipes, for ZM, for PE-v, for FZM or. GFK and - 3.2 inspection certificate for steel pipes and primary material from an approved testing institute in accordance with DIN EN 10204, as applicable. Pipes must always remain closed at the pipe ends; the pipe ends must be sealed with plastic caps. Procedure: open. Estimated value: 1,510,000 EUR. Review the original TED notice for the complete requirement, lots, amendments and attachments.