Germany – Plasterboard works – Drywall works

Opportunity description

For two separate 4-story new buildings with usable floor areas of 2,295 sqm (administration building) and 10,969 sqm (library), respectively, drywall works are to be carried out, and interior doors, interior windows, glass system partition walls, movable partition walls, acoustic curtains, WC partitions and hollow floors are to be supplied and installed. … Title 01 Administration building 01 Site setup 02 Drywall works, walls: 2,265 sqm plasterboard walls, d = 10 to 15 cm, 219 sqm plasterboard double-stud walls, d = 16 to 50 cm 03 Drywall works, shaft walls: approx. 100 sqm shaft walls F90, d = 12.5 to 15 cm, 268 sqm acoustic plasterboard wall linings, 104 sqm perforated acoustic wall panels 04 Drywall works, wall linings: 283 sqm shaft walls, d = 7.5 to 12.5 cm 05 Drywall works, dry plaster: approx. 30 sqm dry plaster 06 Wall connections: 485 m sliding ceiling connections, 405 m UA profiles b = 50 to 150 mm, 67 crosspieces, 111 m inclined wall connections, etc. 07 Openings / service penetrations in walls: 157 door openings, create 388 round + 425 rectangular openings for MEP trades, 08 Drywall works, ceilings: 1,055 sqm suspended plasterboard ceilings, 1,635 sqm ceilings as above, but perforated, 134 sqm free-spanning plasterboard ceilings, 78 inspection hatches 09 Steel profiles and fire-protection cladding: 1,354 kg square hollow profiles for installation in plasterboard walls, 240 telescopic supports for installation in plasterboard walls, 96 m fire-protection cladding F90 for supports 10 Acoustic curtains and blackout: three acoustic and blackout curtains, L = approx. 6 to 10 m 11 Interior doors: 136 wooden doors with HPL facing and steel wrap-around frames, with fittings, 10 single- or double-leaf fire doors EI 30 with wooden lining frames and fittings, 12 Interior windows: 14 monoblock interior windows of approx. 2.8 to 7 sqm 13 WC partitions: 49.5 sqm WC partitions made of laminate composite elements, 12 doors 14 Hollow floors: approx. 800 sqm hollow floors F30 made of fiber-reinforced calcium sulfate material, 117 inspection openings 60 x 60 cm Title 02 Library 01 Site setup 02 Drywall works, walls: 7,075 sqm plasterboard walls, d = 10 to 12.5 cm, 941 sqm plasterboard walls, d = 15 to 20 cm, 140 sqm plasterboard double-stud walls, d = 33 to 39 cm 03 Drywall works, shaft walls: 293 sqm shaft walls F30 to F90, d = 10 to 12.5 cm 04 Drywall works, wall linings: 1,503 sqm wall linings, d = 10 cm, 1,412 sqm freestanding interior wall lining in front of exterior wall 05 Drywall works, dry plaster: approx. 400 sqm dry plaster 06 Wall connections: approx. 490 m sliding ceiling connections, 2,032 m UA profiles b = 50 to 150 mm, 249 crosspieces, 615 m inclined wall connections, 5,370 m flush-mounted aluminum skirting boards 07 Openings / service penetrations in walls: 71 inspection hatches, 205 door openings, create 984 round + 1,106 rectangular openings for MEP trades, 08 Drywall works, ceilings: 2,387 sqm suspended plasterboard ceilings, 2,795 sqm ceilings as above, but perforated, 3,074 sqm suspended plasterboard acoustic ceilings with acoustic plaster, 385 sqm panel ceilings with wood-wool acoustic panels, 148 sqm independent fire-protection ceilings, 1,486 inspection hatches, 2,570 sqm acoustic plaster on heating/cooling acoustic ceilings of the MEP trade 09 Drywall works, bulkheads / partitions: 262 sqm ceiling bulkheads, 76 sqm ceiling partitions F30 to F90-M, 390 sqm sound-insulation partitions in the ceiling area 10 Steel profiles and fire-protection cladding: 5,620 kg square hollow profiles for installation in plasterboard walls, 366 telescopic supports for installation in plasterboard walls, 219 m fire-protection cladding F90+F90-M for supports 11 Drywall works, ceilings, Atrium A + B: ceiling cladding made of prefabricated individual plasterboard ceiling elements, including substructure beneath 14 + 17 roof domelights, heights 75 + 88 cm respectively 12 Metalwork, balustrades, Atrium A + B, shaft cladding, Atrium B: approx. 4,000 kg rectangular hollow profiles for installation in plasterboard balustrades, approx. 1,400 kg flat steel for plasterboard stair balustrades, approx. 3,170 kg rectangular hollow profiles for the shaft-cladding structure, 14 m freestanding railing 13 Drywall balustrades, Atrium A + B, wall cladding, Atrium B: 169 sqm plasterboard wall cladding, 58 sqm plasterboard wall cladding as absorber surface, 214 m hardwood balustrade covers, 407 sqm wall cladding made of veneered particleboard, 80 sqm worktops made of veneered particleboard, 215 sqm wall cladding made of wood-wool acoustic panels, 147 sqm shaft cladding made of aluminum sandwich panels, including substructure with 12 inspection doors 14 Movable partition walls: three movable partition walls, each consisting of approx. 8 individual elements with a width of approx. 120 cm, including substructures and ceiling partitions 15 Electric curtains, grating and miscellaneous: 13 acoustic and dim-out curtains, W = approx. 1.7 to 8.8 m, height approx. 3.5 m each 16 Absorbers, refrigeration plant room + pinboard absorbers: 37.7 sqm absorbers made of multilayer wood-wool panels, 58 magnetic pinboard absorbers ranging from 80x300 cm to 560x220cm 17 Fire-protection interior windows, Atrium A: 9 interior windows EI 30, some providing fall protection, each measuring 1.55 x 1.55 m with surrounding frames made of veneered plywood 18 Interior doors: 33 wooden doors with HPL facing and wooden wrap-around frames, 48 single- or double-leaf fire doors EI 30 with wooden block frames, 187 single- or double-leaf fire doors EI 30 with wooden lining frames, 2 single-leaf wooden fire doors EI 30 with aluminum frames, 19 shaft doors made of gypsum-bonded laminate, each with stainless-steel fittings, panic and emergency-exit devices, locks, door closers and safety components 19 Glass system partition walls: 18 system partition walls, sizes ranging from approx. 3.50 x 2.26 m to 12.30 x 2.26 m, with 50 hinged doors 20 WC partitions: 227.5 sqm WC partitions made of laminate composite elements, 49 doors, 21 Hollow floors: 7,308 sqm hollow floors F30 made of fiber-reinforced calcium sulfate material, 245 inspection openings 60 x 60 cm Procedure: open. Review the original TED notice for the complete requirement, lots, amendments and attachments.