Germany – Special-purpose motor vehicles – Supply of a multi-purpose implement carrier with front-mounted mower, SM Neubrandenburg

Opportunity description

- Multi-purpose implement carrier with municipal hydraulics - Engine power at least 200 kW - Implement drive via front PTO and municipal hydraulics - Mounting and operation of front- and rear-mounted implements - The front axle load and payload must be suitable for accommodating, during the winter period, a > 4.5 m³ mounted spreader/FS30 and a front snowplow (approx. 1.1 t / front mounting), as well as, in individual cases, a rotary snow blower (up to approx. 1.7 t / front mounting) instead of the front snowplow. During summer operation, the mowing combination put out to tender here (temporarily with hedge trimmer) is to be operated. A torsion frame for load balancing must be included in the planning if required! - The driver's cab requires 1 / 12-volt socket and 2 / 24-volt sockets (for the mower and mounted spreader), as well as the standardized interface for the attached/mounted implements (UES 6) - The general equipment and safety markings must comply with the requirements imposed on road maintenance service vehicles pursuant to the StVZO. Procedure: open. Review the original TED notice for the complete requirement, lots, amendments and attachments.