Poland – Construction machinery and equipment – Supply of construction equipment for the needs of Wodociągi Białostockie Sp. z o. o.: PART I: Wheeled excavator PART II: Wheel loader

Opportunity description

1. The subject of the contract is the supply of a brand-new construction machine: 1) Part I – wheeled excavator 2) Part II – wheel loader Detailed description of the subject of the contract – Part I – wheeled excavator: 1) Technical parameters of the subject of the contract – Part I: a) Year of manufacture – 2026, b) Operating weight min. 16 tonnes, max. 19 tonnes, c) Liquid-cooled diesel engine with a displacement of min. 4000 cm3 and power of min. 130 HP, meeting the applicable exhaust emission standards, d) Variable-flow hydraulic system with a total capacity of min. 240 l/min and working pressure of min. 300 bar e) Hydraulic line for a demolition hammer, f) Hydraulic locks on the working arm, g) Air-conditioned and heated cab meeting the applicable safety requirements, h) Adjustable pneumatic operator’s seat, i) Machine operation controlled by means of two joysticks, j) Factory-installed radio with Bluetooth hands-free kit, k) Minimum digging depth – 5200 mm, l) Turning radius (outer turning radius) – max. 7 m, m) Min. 3 travel speeds, n) Arm suspension during travel, o) Fuel tank min. 280 litres, p) Self-refuelling pump, q) 4x4 drive on both axles, r) Twin wheels on both axles, s) Front hydraulic stabilisers, t) Rear blade, u) Shackle on the arm, v) Reversing alarm, w) Factory-installed reversing camera, with a display integrated with the displays in the operator’s cab, x) LED work lights, y) Orange LED warning light, z) Warning triangle, fire extinguisher, grease gun, aa) Rotating head with hydraulic quick coupler, bb) 1000 mm bucket with cutting edge, cc) 600 mm bucket with cutting edge, dd) 450 mm bucket with cutting edge, ee) Scandinavian-type grading bucket with a width of min. 1500 mm, ff) Demolition hammer with hoses and quick couplings, compatible with the machine, equipped with 2 pencil-point chisels, gg) Hydraulic grapple, hh) Hydraulic compactor, compatible with the machine, ii) Carriage with pallet forks. Detailed description of the subject of the contract – Part II – wheel loader: 1) Technical parameters of the subject of the contract – Part II: a) Year of manufacture – 2026, b) Operating weight min. 18 tonnes, max. 21 tonnes, c) Liquid-cooled diesel engine with a displacement of min. 6500 cm3 and power of min. 240 HP, meeting the applicable exhaust emission standards, d) Variable-flow hydraulic system with a total capacity of min. 240 l/min and working pressure of min. 220 bar e) Min. 4 forward gears, min. 3 reverse gears, f) Articulated frame with an articulation angle of min. 40 degrees, g) Air-conditioned and heated cab meeting the applicable safety requirements, h) Adjustable, heated pneumatic operator’s seat, i) Factory-installed radio with Bluetooth hands-free kit, j) Heated rear window, k) Reversing alarm, l) Factory-installed reversing camera, with a display in the operator’s cab, m) Electrically controlled and heated rear-view mirrors, n) Front and rear windscreen wipers, o) Reversible fan, with a function for programming its activation frequency, p) Automatic engine speed reduction function when the operator is inactive, q) START/STOP system, with a function allowing the operator to program the time after which the engine is to be switched off and a function for disabling the START/STOP system, r) Minimum height to the bucket pivot pin – 4100 mm, s) Ground clearance min. 450 mm, t) Optimal lifting capacity – min. 6000 kg, u) Turning radius (outer turning radius with bucket) – max. 7 m, v) Fuel tank min. 280 litres, w) Central lubrication system, x) Self-refuelling pump, y) 4x4 drive on both axles, z) Engine block heater powered by 230V mains voltage, aa) LED work lights, at the front and rear of the machine, bb) Road lights, cc) Orange LED warning light, dd) Front and rear wheel mudguards, ee) Warning triangle, fire extinguisher, grease gun, ff) Loader bucket with a capacity of min. 3.3 m3 with cutting edge, gg) Additional cutting edge for the loader bucket. hh) Load weighing system for the machine’s bucket with a display in the operator’s cab. Procedure: open. Review the original TED notice for the complete requirement, lots, amendments and attachments.