Poland – Front-end shovel loaders with backhoe – Purchase of equipment for the District Road Authority in Łask

Opportunity description

1. The subject of the contract is the supply of equipment for the District Road Authority in Łask. The scope of supply comprises the following 5 LOTS OF THE CONTRACT: I. Supply of 1 backhoe loader in accordance with the requirements of Annex No. 1 to the SWZ – detailed description of the subject of the contract; II. Supply of 1 municipal tractor, in accordance with the requirements of Annex No. 1 to the SWZ – detailed description of the subject of the contract; III. Supply of 1 tipper trailer, in accordance with the requirements of Annex No. 1 to the SWZ – detailed description of the subject of the contract; IV. Supply of 1 tipper truck, in accordance with the requirements of Annex No. 1 to the SWZ – detailed description of the subject of the contract; V. Supply of 1 mowing arm, in accordance with the requirements of Annex No. 1 to the SWZ – detailed description of the subject of the contract. 2. The subject of the contract must meet the following requirements: a) correspond to all characteristics specified in the specification of contract conditions. b) be new and comply with applicable standards. c) have a complete set of technical and operating documentation. Homologated power min. 109 hp Backhoe boom suspension or equivalent system, automatic loader bucket levelling system Maximum digging depth not less than 5.80m, reach at ground level from the boom pivot axis not less than 6.40m, reach from the machine axis not less than 7.00m Lifting capacity min. 1082kg with extension and min. 1885kg without extension Multifunctional 6-in-1 loader bucket with forks, capacity Min. 1.0m3 Loading height min. 3.20m, unloading height 2.72m Tilting ditching bucket 1500mm Backhoe bucket 610mm Milling head Toolbox, Torque Lock system Engine displacement from 5.0 l, 6-cylinder, equipped with at least 16 valves Warranty min. 24 months Front three-point linkage with PTO valve, independent PTO mounted at the rear – PTO speed min. 540/1000 rpm. Ability to engage the PTO from the rear fender Hydraulic pump not less than 100 l/min Homologated power min. 150HP Documentation enabling registration of the vehicle in Poland, including the manufacturer’s declaration of conformity Wide pneumatic, tubeless, radial tyres intended for municipal, industrial and transport work Mechanical, manual gearbox, min. 24/24 gears with automatic three-stage torque amplifier External hydraulics: 4 independent sections at the rear and 2 sections at the front Homologation for 2 persons, rear wheel weights min. 500 kg Internal combustion engine (e.g. diesel), meeting current Stage V exhaust emission standards front and rear windscreen wipers electrically adjustable, heated exterior mirrors Rear work lighting min. 2 spotlights Front work lighting min. 4 spotlights Warning lighting min. 2 orange flashing LED lamps Heated, air-conditioned and ventilated cab Lower hitch bar External lift control Adjustable steering wheel Rear lift capacity min. 5000 kg Front lift capacity min. 2000 kg The tractor’s maximum design speed must not exceed 40 km/h Creeper gears – minimum speed maximum 0.2 km/h 4x4 drive engaged by an electro-hydraulic system Min. three hydraulic circuits for powering equipment Cab windows (rear and side windows) must be structurally adapted for opening/tilting. AdBlue tank min. 45 l Fuel tank min. 150 l 1- and 2-circuit trailer brakes Service book Passenger seat with safety belt Suspended driver’s seat with safety belt Additional equipment: fire extinguisher, triangular distinguishing plate, warning triangle Permissible gross weight min. 8100 kg Permissible unladen weight min. 2000 kg Load box dimensions: min. length 4000mm, min. width 2000mm Tipping system: three-way, telescopic cylinder Rear hitch, manual, rigid Rear hydraulic and brake connections for a second trailer Documentation enabling registration of the vehicle in Poland, including the manufacturer’s declaration of conformity Permissible trailer payload: not less than 6000 kg Number of axles 2 Wheelbase up to 2000mm Sideboard height 500 + 500 mm Warranty min. 24 months Factory-new, with a GVW of up to 3.5t and min. 140hp Year of manufacture 2026, exhaust emission standard min. Euro 6 Cab for min. 5 persons Length min. 7m Box for small equipment (saws, brushcutters) with dimensions min. 60x60x200 cm Self-unloading box (tipper) with frame and tarpaulin Factory-installed TOW HITCH, towing capacity min. 2500kg Manual gearbox Complete set of documents for registration Fuel type – diesel fuel Warranty min. 24 months Authorised service facility within the Republic of Poland at a maximum distance of 100km. Minimum vehicle payload after body installation min. 800kg The payload must be evidenced by the vehicle homologation documents after installation of the body and must cover a vehicle ready for operation, with all equipment required by law. Load box: internal box length: minimum 3 400 mm, internal box width: minimum 2 000 mm, sideboard height: minimum 400 mm, aluminium or steel sideboards, opening, with quick-removal capability, floor made of steel sheet of a thickness ensuring the safe transport of bulk materials. Tipping: hydraulic, three-way (rearward and to both sides), tipping controlled from the cab or from an external control panel, protection preventing accidental activation of tipping. Arm min. 7 m adapted for operation with a tractor with power from 150 HP, with mower and mulcher: Mower power – at the hydraulic pump – min. 120 HP; Inner arm with extension above 0.5m, enabling the mower’s reach to be increased, mounted on the rear three-point linkage; forged or cast arm joints (durable, guaranteeing joint rigidity), enabling work with a head weighing over 300 kg at the arm’s full reach, above 6 m. system operating pressure min. 350 Bar pump flow min. 100 l/min. weight min. 900 kg Warranty min. 24 months Mower head: system operating pressure min. 350 Bar head width for cutting bushes and grass – 110-120 cm. The head should have blades that do not damage the working shaft and do not strike the shaft during operation. head adapted for installation on the hydraulic arm covered by this specification spherical roller bearings with journal diameters min. 60-80 mm on the cutting shaft shaft speed min. 3100 rpm. power supply – hydraulic weight min. 300 kg Arm rotation breakaway safety device min. 90° Arm controlled by an electronic joystick Electronically controlled oil cooler used in the mower for operation in conditions of high dust levels and high ambient temperature Warranty min. 24 months Mulcher: system operating pressure min. 350 Bar working width of the head for cutting bushes and grass – 75-100 cm. The head should have blades that do not damage the working shaft, do not strike the shaft during operation, and shred bushes and branches with diameters up to 12 cm. head adapted for installation on the hydraulic arm covered by this specification power supply – hydraulic weight min. 200 kg Arm rotation breakaway safety device min. 90° Arm controlled by an electronic joystick Electronically controlled oil cooler used in the mower for operation in difficult conditions Warranty min. 24 months Procedure: open. Review the original TED notice for the complete requirement, lots, amendments and attachments.