Poland – Refuse and waste related services – Service involving the successive collection, transport and management of waste designated in the waste classification by code 19 12 12 – other waste (including mixed substances and objects) from mechanical treatment of waste other than that mentioned in 19 12 11

Opportunity description

1. The subject matter of the contract is—under the conditions described in the agreement to be concluded between the Contracting Authority and the Contractor, the SWZ, and the Contractor’s tender—the successive collection, transport, and management of waste collected by the Contractor from the Contracting Authority and classified under code 19 12 12 – other waste (including mixed substances and objects) from mechanical treatment of waste other than that mentioned in 19 12 11, divided into 3 parts, in the types and quantities specified below. 2. The waste may be subjected exclusively to recovery processes R1 and/or R12, in accordance with the designation of these processes in the Act of 14 December 2012 on Waste (consolidated text: Journal of Laws of 2023, item 1587, as amended) / Regulation (EU) 2024/1157 of the European Parliament and of the Council of 11 April 2024 on shipments of waste, amending Regulations (EU) No 1257/2013 and (EU) 2020/1056 and repealing Regulation (EC) No 1013/2006 (OJ EU L 2024.1157), whereby “subjecting to a recovery process” means commencing and completing that process. 3. The subject matter of the Contract includes: 1) Part No 1 – comprising an energy-bearing ballast waste fraction from the municipal waste sorting process in a quantity of 9000 Mg (+/-) 10 Mg (quantity differences may result from storage conditions and the technical and technological solutions used in the weighing system), but not less than 1000 Mg (minimum performance). Waste packaging: Loose waste. 2) Part No 2 – comprising an energy-bearing ballast waste fraction from the municipal waste sorting process in a quantity of 9000 Mg (+/-) 10 Mg (quantity differences may result from storage conditions and the technical and technological solutions used in the weighing system), but not less than 1000 Mg (minimum performance). Waste packaging: Loose waste. 3) Part No 3 – comprising an energy-bearing ballast waste fraction from the municipal waste sorting process in a quantity of 9000 Mg (+/-) 10 Mg (quantity differences may result from storage conditions and the technical and technological solutions used in the weighing system), but not less than 1000 Mg (minimum performance). Waste packaging: Loose waste. 4. Waste collection: 1) The transfer and collection of Waste shall take place exclusively on the basis of and in accordance with the Contracting Authority’s written (form required on pain of nullity) individual orders addressed to the Contractor and delivered by email, specifying the quantity of Waste and the date by which the Contracting Authority expects it to be collected. 2) The Contracting Authority shall place individual orders when the quantity of Waste accumulated by it to be collected on one day is at least 16 Mg. 3) The Contractor shall collect the Waste while complying with the following technical infrastructure requirements at the Contracting Authority’s facility: a) the gross weight of a single vehicle entering the premises of the Contracting Authority’s facility (empty vehicle for loading) may not exceed 18 tonnes; b) the distance between the outermost axles of a single vehicle may not exceed 16 metres, and the vehicle’s length may not exceed 18 m; c) waste transferred loose is loaded “from above.” 4) After weighing the vehicle loaded with Waste, the Contracting Authority shall issue a warehouse release document. 5) The Contracting Authority shall prepare a Waste Transfer Note [KPO] for each batch of Waste collected from the facility operated by it using the Contractor’s transport. These notes shall be issued in accordance with the Act on Waste. The Contractor shall be responsible for ensuring that the Operator of the Installation in which the recovery process is conducted confirms the weight and type of Waste specified in each Waste Transfer Note issued by the Contracting Authority, in accordance with the Act on Waste. 6) If the shipment of Waste is international, the documents specified in Regulation (EU) 2024/1157 of the European Parliament and of the Council of 11 April 2024 on shipments of waste, amending Regulations (EU) No 1257/2013 and (EU) 2020/1056 and repealing Regulation (EC) No 1013/2006 shall be prepared. The documents shall be prepared in accordance with the requirements of the aforementioned Regulation. 4. Pursuant to Article 16b(2) of the uPzp, the Contracting Authority hereby states that it does not permit the submission of tenders involving supplies or services originating in third countries that are not parties to international agreements. A tender whose scope includes supplies or services originating in third countries that are not parties to international agreements shall be rejected pursuant to Article 226(1)(5) of the uPzp: “The Contracting Authority shall reject a tender if its content does not comply with the procurement conditions.” Procedure: open. Review the original TED notice for the complete requirement, lots, amendments and attachments.