Poland – Repair, maintenance and associated services related to aircraft and other equipment – OVERHAUL (MAJOR REPAIR) SERVICE FOR TECHNICAL MATERIEL FOR AIRCRAFT IN 2026

Opportunity description

1. The subject matter of the contract is an overhaul (major repair) service for technical materiel for aircraft in 2026, in the assortment and quantities specified in the Pricing Form constituting Annex No. 1 to the SWZ. 2. The service shall be performed in accordance with the technical documentation of the manufacturer (Contractor) and shall guarantee the full operational condition of the technical materiel subjected to the service. 3. If technical activities within the scope of performance of the contract (including, inter alia, installation and removal of equipment, performance of equipment inspections, transport of equipment and its component parts, and performance of equipment repairs) consist of performing work in the manner specified in Article 22 of the Act of 26 June 1974 – Labour Code (consolidated text: Journal of Laws of 2025, item 277, as amended), the persons performing the activities in question shall be employed by the Contractor under an employment contract. 4. Equipment intended for performance of the service shall have a remaining technical service life and shall be transferred together with documentation on the basis of which its basic parameters can be determined. Service lives are determined on the basis of Polish normative documents (technical bulletins, etc.). In the event of discrepancies between the technical documentation of the manufacturer or an authorised overhaul facility and the documents determining the service life referred to above, the Contractor shall, when performing the subject matter of the contract, be bound by the standards arising from Polish normative documents. 5. If the Contracting Authority sends for overhaul (major repair) technical materiel whose remaining technical service life does not allow the facility performing the service to assign the full inter-overhaul service life, the Contractor shall assign an inter-overhaul service life within the remaining technical service life. 6. If it is not possible to overhaul (perform a major repair of) the transferred equipment, the Contracting Authority provides for the possibility of supplying (within the value of the service being performed) equipment of the same type from the Contractor’s warehouse stocks:  new, manufactured in the year in which the service is performed or manufactured earlier in the case of products that do not have a calendar service life;  following overhaul (major repair), with the full remaining inter-overhaul service life, provided that the remaining technical service life may not be less than that of the unit sent for overhaul (major repair). If the above circumstances arise, the Contractor shall be required to obtain the Contracting Authority’s written consent in this regard. 7. If new equipment is supplied in accordance with paragraph 6, first indent, the Contractor shall provide with the products an OiB declaration of conformity issued in accordance with the Act of 17 November 2006 on the conformity assessment system for products intended for the needs of national defence and security (consolidated text: Journal of Laws of 2022, item 747, ) and as specified in the Regulation of the Minister of National Defence of 11 January 2013 on the detailed list of products subject to conformity assessment and the method and procedure for conducting conformity assessment of products intended for national defence needs (consolidated text: Journal of Laws of 2021, item 1628) – i.e. under conformity assessment procedure I. 8. Following the overhaul (major repair) of the equipment, the Contractor shall assign an inter-overhaul service life in accordance with the technical documentation rules of the manufacturer or overhaul facility. The list of documentation, i.e. (name, number, identifier, etc.), is contained in Annex No. 4 to the draft contractual provisions. 9. The products shall be preserved for a period of no less than 2 years and in accordance with the rules set out in defence standard NO-16-A800:2007 and placed in packaging protecting the subject matter of the contract against loss of usability characteristics during transport/storage throughout the warranty period. The use of protection methods other than those specified in defence standard NO-16-A800:2007 is permitted, provided that they ensure equivalent or better protection. 10. The subject matter of the contract shall be subject to a quality assurance process in accordance with the rules specified in the draft contractual provisions constituting Annex No. 2 to the SWZ. 11. The requirements contained in AQAP 2110, edition D, version 1, apply to this contract for items 4, 10÷12, 29, 39, 41 of Annex No. 1 to the draft contractual provisions constituting Annex No. 2 to the SWZ, and the requirements contained in AQAP 2131, edition C, version 1, apply to items 1÷3, 5÷9, 13÷28, 30÷38, 40, 42÷43 of the annex to the draft contractual provisions constituting Annex No. 2 to the SWZ. 12. The Contractor’s quality management system shall meet the requirements contained in PN-EN ISO 9001:2015. 13. The Contractor shall provide a warranty for failure-free operation of the equipment following performance of the service for a period of 24 months/200 operating hours (whichever occurs first), calculated from the date of acceptance of the product. 14. In accordance with Article 455 of the Pzp Act, the Contracting Authority permits the contract to be amended without conducting a new contract award procedure in the cases and under the conditions specified in § 18 of the draft contractual provisions constituting Annex No. 2 to the SWZ. 15. The detailed conditions for performance of the contract are specified in the draft contractual provisions. 16. The Contracting Authority reserves the right to exercise an option. Under the option, the Contracting Authority may additionally commission an overhaul (major repair) service for technical materiel in the assortment and maximum quantities specified in the Pricing Form constituting Annex No. 1 to the SWZ. The optional contract shall be performed at the same gross unit prices as in the tender. 17. Pursuant to Article 257 of the Pzp Act, the Contracting Authority provides for the possibility of cancelling the contract award procedure if the public funds that the Contracting Authority intends to allocate to finance the contract are not granted to it. 18. The award of the contract does not involve providing the Contractor with classified information, access to which requires compliance with the provisions of the Act of 5 August 2010 on the protection of classified information (consolidated text: Journal of Laws of 2024, item 632, as amended). 20. The Contracting Authority divided the subject matter of the contract into 43 lots. Valve - Equipment type: M-28 Procedure: restricted. Review the original TED notice for the complete requirement, lots, amendments and attachments.